Air purifier common filter maintenance strategy

Air purifiers, also known as air cleaners, can cause damage to the body if we live in a bad environment for a long time. In order to be healthy, many families have purchased air purifiers, and the most important part of the air purifier is the filter system. So, the maintenance of the filter is really important. The following is a general filter maintenance guide for your air purifier, I hope to help you.

Air purifier common filter maintenance strategy

Air purifier common filter maintenance strategy

Pre-filter: It can effectively remove large dust, mold and animal hair, and protect other filters.

Cleaning: It is recommended to carry out cleaning once a month. When cleaning, you can use a vacuum cleaner to remove the dust on the surface and then wash it.

Allergen filter: Filter out allergens such as pollen from the air and pet hair.

Cleaning: It is recommended to clean once a month. This filter can't be washed. After using it for a while, it can be beaten and dusted.

Activated carbon carbon filter: generally used to remove odor in the air. Active carbon charcoal has always been considered as one of the best materials for odor removal. Therefore, in recent years, the application of activated carbon in deodorization products, whether it is home, refrigerator, for most odors, it can play a good role. effect.

Cleaning, this layer of filter can not be manually cleaned, the recommended replacement cycle is generally six months.

HEPA filter: HEPA is an internationally recognized and best high-efficiency filter. Originally used in nuclear energy research and protection, HEPA is now widely used in high-purity places such as precision laboratories, pharmaceutical production, atomic research and surgery. HEPA is made up of very fine organic fibers. It has strong ability to capture particles, has small pore size, large adsorption capacity, high purification efficiency, and water absorption. The particle purification rate for 0.3 micron is 99.97%. That is to say, only 3 of every 10,000 particles can penetrate the HEPA filter membrane. Therefore, its effect of filtering particulate matter is very obvious! If it is used to filter cigarettes, the filtration effect can be almost 100%, because the size of the particles in the cigarette is between 0.5 and 2 microns, and the membrane cannot pass through the HEPA filter.

Cleaning: HEPA filters are generally not washable, and replacement is recommended when using for 6 months. (The HEPA filter used by LG can be washed, but since every wash will affect the effect of the filter, it is recommended that the number of cleaning is less than 16)

Water filter: This layer of filtration system is not available in all brands.

Cleaning: Because the water quality is different, it is generally suitable to clean once a week. If the scale is condensed on the top, you can use vinegar to soak.

7.62MM Power+ Signal Power Connector

power connector is used in power module system. It can select the matching power + signal connector according to the need. The feature is that the number of power and signal contacts and the matching sequence can be selected arbitrarily while keeping the connector size and contact core number unchanged.

Plug (male) / socket (female) can be installed at 90 or 180 degrees. It supports mixed or independent combination of signal and power. The quantity range of power and signal is (2-16) pin and (12-128) pin respectively


Product features

High temperature resistant, glass fiber reinforced and flame retardant polyester is used as insulation material

Copper gold composite conductor with high conductivity is used, and the contact area of the conductor is plated with gold
It adopts shrapnel contact, which has the characteristics of integration, small volume, large current carrying capacity, soft plug-in, blind plug-in, self guidance and high dynamic contact reliability. This series of products can be interchanged with FCI's powerblade series and Tyco's multi-beam series
There are three sizes of center distance of power contact: 5.08mm, 6.35mm and 7.62mm

The length of power hole / signal pin can be selected in two sizes. The power rated current is 45A and the signal rated current is 2.5A

7.62MM Power+ Signal Power Connector

ShenZhen Antenk Electronics Co,Ltd , https://www.antenk.com