LED commercial interior lighting urgently needs rapid development

In recent years, with the improvement of the conversion efficiency of the LED lamp heat energy, the brightness has been greatly improved and the price has been greatly reduced. The market has begun to recognize LED lighting products. The LED lamp has a long life and consumes electricity as a new lighting lamp. Low volume, high brightness began to gradually become a new market. LED commercial lighting has become a bright spot in the development of the industry. Then, what is the development status of commercial LED lighting market?

LED commercial indoor lighting development needs rapid development

Since its inception, LED lamps have been favored by electronic engineers for their high reliability, easy control, and small size. The first electronic device indicator was found, and gradually entered signal indicators such as traffic red, green light and other occasions. However, due to the low brightness of early LED lights, the low conversion rate of heat energy and the high price are not well known to the general public. Commercial applications are also limited to building outline decoration, decorative lighting and other non-mainstream lighting applications.

Based on the analysis of LED lamp life and power consumption, compared with conventional equivalent lamps, the use cost of LED bulbs, LED ceiling lights, LED downlights, and LED flexible strips has been significantly lower than traditional lighting fixtures. In 2012, the reduction in the cost of LED chips and the development of technology will increase the effectiveness of LED lighting, and it will start to send a strong declaration of warfare to traditional lighting fixtures.

Compared with traditional lamps, LED lamps have strong plasticity, but they are not limited to the design of traditional lamps. Because LED lamps have a small size, they can be used to make a variety of designs suitable for the environment. Such as LED downlights, we can make round traditional lamps, can also be made into a square, but also can be made into an irregular shape, can also be made into a panel light with a thickness of only 9MM, these are beyond the traditional lighting.

LED lamps are easier to integrate and intelligently control. Compared with traditional lamps and lanterns, LED lamps realize dimming, and the implementation method is much simpler than traditional lamps and lanterns. Simply speaking, it can achieve 0-100% dimming by using power amplifiers, LED dimmers, no flash, no limit Dimming continuously. More intelligent, online control can be achieved through DMX512, according to the dynamic effect to achieve random control of LED lights, light or dark, or flow changes or a variety of dynamic changes. However, it is relatively difficult for traditional lamps to achieve dynamic changes.

At present, commercial lighting considers more should be the human experience design, what kind of environment, what color to use, what color temperature light source to achieve the designer's original intention. Such as jewelry lighting counters, generally use LED jewelry cabinet lights, white gold counter area using 7000-8000K bright white LED light source to illuminate the entire platinum jewelry product itself, reflecting the product more white and elegant elegance, and gold products using LED color temperature light source 3500-3800K The warm white light source contrasts with the magnificent and elegant features of the product. Jewellery Lighting Counters With the advantages of small size, small lighting angle and higher luminous efficacy, LED lamps are a perfect substitute for traditional fluorescent lamps. Different business environments, different shopping experiences, and higher requirements for the design of lighting angles and color temperatures are beyond the capabilities of traditional lighting fixtures. LED floodlights, LED spotlights, and LED downlights make it all possible. It's easier to change.

The increasing efficiency of LED downlights and the ever-decreasing prices have sounded the door to commercial lighting. At present, commercial lighting adopts traditional energy-saving lamp lighting, not to mention mercury pollution, energy-saving lamps are large, the entire downlight takes up a lot of space, not beautiful, when the entire supply voltage is unstable, the downlight is easy to flicker. LED downlight light source and housing integrated design, the use of milky white or atomized mask embedded ceiling interior and ceiling integration, beautiful appearance, high-grade, uniform light source, LED power supply with constant current design, not subject to external voltage changes, the light source is always maintained Consistent illumination. The above advantages are improving with the improvement of LED technology, providing a reliable technical guarantee for LED lighting entering commercial lighting.

LED commercial indoor lighting development depends on technological innovation

Since its inception, LED lamps have been favored by electronic engineers for their high reliability, easy control, and small size. The first electronic device indicator was found, and gradually entered signal indicators such as traffic red, green light and other occasions. However, due to the low brightness of early LED lights, the low conversion rate of heat energy and the high price are not well known to the general public. Commercial applications are also limited to building outline decoration, decorative lighting and other non-mainstream lighting applications.

In recent years, with the improvement of the conversion efficiency of the LED lamp heat energy, the brightness has been greatly improved and the price has been greatly reduced. The market has begun to recognize LED lighting products. The LED lamp has a long life and consumes electricity as a new lighting lamp. Low volume, high brightness began to gradually become a new market. Based on the analysis of LED lamp life and power consumption, the cost of LED bulbs, LED ceiling lights, LED downlights, and LED flexible strips has been significantly lower than traditional lighting fixtures. In 2012, the reduction in the cost of LED chips and the development of technology will increase the effectiveness of LED lighting, and it will start to send a strong declaration of warfare to traditional lighting fixtures.

Compared with traditional lamps, LED lamps have strong plasticity, but they are not limited to the design of traditional lamps. Because LED lamps have a small size, they can be used to make a variety of designs suitable for the environment. Such as LED downlights, we can make round traditional lamps, can also be made into a square, but also can be made into an irregular shape, can also be made into a panel light with a thickness of only 9MM, these are beyond the traditional lighting.

LED lamps are easier to integrate and intelligently control. Compared with traditional lamps and lanterns, LED lamps realize dimming, and the implementation method is much simpler than traditional lamps and lanterns. Simply speaking, it can achieve 0-100% dimming by using power amplifiers, LED dimmers, no flash, no limit Dimming continuously. More intelligent, online control can be achieved through DMX512, according to the dynamic effect to achieve random control of LED lights, light or dark, or flow changes or a variety of dynamic changes. However, it is relatively difficult for traditional lamps to achieve dynamic changes.

At present, commercial lighting considers more should be the human experience design, what kind of environment, what color to use, what color temperature light source to achieve the designer's original intention. Such as jewelry lighting counters, generally use LED jewelry cabinet lights, white gold counter area using 7000-8000K bright white LED light source to illuminate the entire platinum jewelry product itself, reflecting the product more white and elegant elegance, and gold products using LED color temperature light source 3500-3800K The warm white light source contrasts with the magnificent and elegant features of the product. Jewellery Lighting Counters With the advantages of small size, small lighting angle and higher luminous efficacy, LED lamps are a perfect substitute for traditional fluorescent lamps. Different business environments, different shopping experiences, and higher requirements for the design of lighting angles and color temperatures are beyond the capabilities of traditional lighting fixtures. LED floodlights, LED spotlights, and LED downlights make it all possible. It's easier to change.

The increasing efficiency of LED downlights and the ever-decreasing prices have sounded the door to commercial lighting. At present, commercial lighting adopts traditional energy-saving lamp lighting, not to mention mercury pollution, energy-saving lamps are large, the entire downlight takes up a lot of space, not beautiful, when the entire supply voltage is unstable, the downlight is easy to flicker. LED downlight light source and housing integrated design, the use of milky white or atomized mask embedded ceiling interior and ceiling integration, beautiful appearance, high-grade, uniform light source, LED power supply with constant current design, not subject to external voltage changes, the light source is always maintained Consistent illumination. The above advantages are improving with the improvement of LED technology, providing a reliable technical guarantee for LED lighting entering commercial lighting.

The introduction of LED industry standards is also stepping up development. According to internal sources, the LED industry standard will be introduced in 2013, and the relevant standards such as the interface of LED lighting and illumination standards will be announced. The growing popularity of LED commercial lighting is gradually becoming clear. In 2012, Shanghai Shengmei Electronic Technology Co., Ltd. shrank its foreign orders by 30%, while domestic domestic lighting orders increased by 60-70%, mostly for energy-saving projects and new business clubs. project. LED lighting companies have begun to enjoy the benefits of energy-saving dividends.

The development of each emerging industry must go through the process of development, maturity, and recession. The LED interior lighting industry is in the stage of development of the industry. It is bound to be the situation where the inferior quality and excellent quality are present, and the essence and dross coexist. Continuous innovation, LED interior lighting can mature, LED interior lighting can break through.